The cylindrical mixer is used for mixing raw materials and pelletizing in ferrous metallurgy sintering plants to supply and satisfy the sintering raw materials on the sintering machine. Through the close cooperation with major design institutes and the accumulation of our own design and processing experience over the years, our company has a strong ability to produce cylindrical mixers from product design, manufacturing technology, tooling, processing equipment to the workforce. , The barrel adopts the overall assembly, processing and transportation process to ensure the stability of the equipment operation. The tires are forged and the overall quenching and tempering; the ring gear adopts the positive and negative structure design, which increases the life of the ring gear by more than 50%. Through continuous optimization of design, the service life of the equipment is extended, the life of the cylinder is more than 15 years, and the life of the ring gear is more than 10 years. In recent years, we have carried out in-depth development of mixers, developed permanent magnet annular direct drive systems, surpassed traditional drive forms, and made further efforts to develop towards environmental protection, energy saving and high efficiency, and create greater value for customers. Simplified speed is generally 6~7r/min2, filling rate is 10~19.5%3, mixing time is 90~220 seconds4, installation angle is 1.8~3° for primary mixing and 1~2° for secondary mixing Notes: Our company can design, manufacture and install drum mixers of any specification for the owner. Customized and tailor-made, using three-dimensional design, the design capacity of the equipment can be up to 2000t/h, the diameter of the cylinder can be up to 5.5m, and the length of the cylinder can be up to 30m.